Aaeon PCM-4330 Guía de instalación descargar pdf (Pagina 18)

12 PCM-4894 User Manual

Open Closed Closed 2-3

1 2 3

Setting jumpers

You configure your card to match the needs of your application by

setting jumpers. A jumper is the simplest kind of electric switch.

It consists of two metal pins and a small metal clip (often

protected by a plastic cover) that slides over the pins to connect

them. To close a jumper you connect the pins with the clip. To

"open" a jumper you remove the clip. Sometimes a jumper will

have three pins, labeled 1, 2, and 3. In this case you would

connect either pins 1 and 2 or 2 and 3.

The jumper settings are schematically depicted in this manual as

follows:

A pair of needle-nose pliers may be helpful when working with

jumpers.

If you have any doubts about the best hardware configuration for

your application, contact your local distributor or sales represen-

tative before you make any changes.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 77 78

Sin comentarios

Aaeon PCM-4330 Guía de instalación Pagina 18