Aaeon PFM-535S Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 53
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
PC/104 CPU Module PFM-535S
Chapter 2 Quick Installation Guide 2- 9
PC104-1 PC/104 Connector
PC104-2 PC/104 Connector
CFD1 CompactFlash Slot
2.6 Setting Jumpers
You configure your card to match the needs of your application by
setting jumpers. A jumper is the simplest kind of electric switch. It
consists of two metal pins and a small metal clip (often protected by
a plastic cover) that slides over the pins to connect them. To “close”
a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will
have three pins, labeled 1, 2 and 3. In this case you would connect
either pins 1 and 2 or 2 and 3.
1
2
3
Open C ed C 2-3los losed
OFF
ON ON 2-3
A pair of needle-nose pliers may be helpful when working with
jumpers. If you have any doubts about the best hardware
configuration for your application, contact your local distributor or
sales representative before you make any change. Generally, you
simply need a standard cable to make most connections.
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 52 53

Comentarios a estos manuales

Sin comentarios